Foxwell BT705 Battery Analyzer Scan Tool 🚘 : LGTV Review
FOXWELL BT 705 CAR BATTERY TESTER ANALYZER PRODUCT REVIEW
How to test your car battery with this affordable analyzer. Foxwell BT-705 tester.
FOXWELL BT705 12V 24V Car Battery Analyzer Tester Test for Cars Duty Trucks AGM Spiral GEL Batteries
100-2000 CCA 12V / 24V Battery Analzyer – isYoung GC-4217
The ANCEL BST500 Battery Load Tester & Charging System Analyzer
FOXWELL BT705 12V 24V Battery Analyzer 100 2000 CCA Automotive Car Battery Load Tester, Cranking and
Best Car Battery Tester 2019
Review And Demo Of DSR’s Battery Tester PST-900X
FOXWELL BT780 12V Battery Tester 0-1000A Car AGM GEL EBP Batteries Analyzer Built-in Printer 12V-24V
BT-705 battery tester is dedicatedly developed to test 12V regular flooded, AGM flat plate, AGM spiral and gel batteries and 12V & 24V starting and charging system. It provides a quick, easy and affordable solution for technicians to check battery health and detect faults of starting and charging system.
Features and Benefits:
Multiple vehicle applications ¨C passenger cars and duty trucks
Tests batteries from rated from 100 to 2000CCA
Tests multiple battery types- regular flooded, AGM flat plate ,AGM spiral and gel
Tests multiple rating systems-CCA,BCI,CA,MCA,JIS,DIN,IEC,EN,SAE,GB
Tests the batteries on the car directly- no need to remove the battery
Detects bad cells
Quick and accurate test result display in just 3 seconds
Tests 12&24 volt charging system
Quick starter analysis without disabling the ignition
Does not emit light, heat or spark ,or discharge battery-keeps operation safe for all levels of users
Automatic temperature compensation
Ripple voltage test for easy and intuitive check of faults
Extremely easy to use with large backlight LCD display and menu-driven operation
Multi-language systems are available on language menu-English, French, German, Russian, Spanish, Dutch and Italian
Optional Bluetooth printer
1. The BT705 can't test 6V battery! 2. Do not connect the tester to a voltage source greater than 30VDC; otherwise you may damage the tester.
3. If you are testing inside a vehicle, make sure all accessory loads are cut off, the key is not in the ON position and the doors are closed.
4. Before starting the cranking test, inspect the alternator drive belt. A belt that is glazed or worn, or lacks the proper tension, will prevent the engine from achieving the rpm levels needed for the test.