Jtron 400A Battery Master Disconnect Switch (Plated Copper)

  • How To Install A Car Battery Disconnect Switch
«
»
Amazon Price: $10.99 $10.99 (as of March 26, 2019 11:51 am – Details). Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on the Amazon site at the time of purchase will apply to the purchase of this product.

Zinc Alloy Platin Battery Switch Head,17mm Universal Negative Dedicated ,Power Protection, Leakproof.
product information:
Copper zinc alloy Battery switch head, play to prevent discharge, protect the battery.
Withstand current 400A.
Aperture 17mm.
Suitable battery terminals: 16 ~ 17mm.
In step (demolished in ordinary car battery as an example):
Step 1: Find the car battery cathode column, confirm the negative head diameter of 16 ~ 17mm in size (the size of a conventional car battery), the need to replace the original car negative negative chuck removed with the battery cable and split open. Check whether the electrode column oxidation with brush to clean the battery, increasing the conductivity of the electrode column to remove the oxide layer.
Step two: the battery switch set in the negative column, with a wrench and tighten the screws.
The third step: switch sandwiched between the electrode column, the corresponding nut rugged good, solid grip it can not loose.
The installation is complete: The above green knob is 4-5 laps (not win) the vehicle off, tighten the entire vehicle immediately energized, safe and practical.
It is made from a high-conductivity zinc alloy and brass plated to prevent corrosion.

728x90

Leave a Reply

Your email address will not be published. Required fields are marked *